Viper2004
Weight : 1050g
size : 80mm*75m*200mm
|
We combined optical fibers and electrical signal cable into one multiple cable. So we can transmit laser and electrical signal
with just one cable. One projector is set on the top side of this cable.
[Features]
Using our unique processing on the face of optical fiber, the coupling loss of laser is very low comparing with the ordinary
optical connector.
Because of setting drive amplifier of the galvano meter on the input side of optical fiber, we succeeded to make smaller the
projector. Our projector is almost the same size as a couple of cigarette boxes. So a customer can set the projector on any place
he likes in various ways.
We succeeded in sending the laser beams through the water with our waterproof case,
The combination of the optical fiber and electrical wires into one cable makes the cable stronger and safer that is not easily
damaged.
Normally the laser light source and the other electrical equipment require an ideal environment. By using the Viper customer can
display the laser beams from the worst environment even in the situation which previously has been thought impossible.
With the Viper a customer can design for any type of setting.
|
The real color system
The real color system, which is combined the latest
laser technology with KAST's producing technology, has
big advantage compare with the older color laser display
system.
-
Electricity and water amount for cooling will be half
amount, compare to the older system of which is the
same type of optical system, and the running cost will be
lower than ever.
-
We succeeded to design the optical system very simply.
So that it is very low-cost, high precision, and easy
system to improve. It is also very stable system for long
span.
-
The speed of optical light is 1,000 times faster than
old type system of ours. So it can show various types of
graphics and expression in the space with the vary of
colors in every 1 dot or 1 beam.
White laser
The usual display, which is combined Argon laser(blue and green)
with Krypton laser (red) shows us the color display with the combination
of the three primary colors. But it needs electricity and refrigerator
for each machine. White laser can display the 2 system of
those by one machine, so that the real color laser system can show
the same laser with half cost of old ones.
PCAOM
Old laser display system uses dycroic mirror, which reflects specific
wavelength of the light, and it changes and selects the colors to
appropriate for the signals of control system.
The precision of colors and beam depends on the design and precision
of the dycroic mirror, and the design and the precision of its assembly
of optical materials. And also the speed of change of colors depends
on the speed limitation or repetition of spin of dycroic mirror,
so that the old type system was restricted more lowly level of
precision of colors and beams.
But PCACOM can conduct the various types of colors and wavelength
of laser beams with high precision and high speed by the white light,
which is, bent the optical crystal by supersonic waves.
The real color laser system is more simple optical design than older
system, by using PCAOM. It realizes less loss of optical system,
improving of optical precision, and also realizes various directions by
high-speed and high precision of colors.
|
REAL COLOR LASER
|
|---|
|
